9YG-2.24D (S9000 Classic) Round Baler | Replacement of John Deere Baler

Product Introduction

The 9YG-2.24D (S9000 Classic) round baler is a heavy-duty machine designed and manufactured by Brazil Agricultural Balers Co., Ltd specifically for producers in Brazil who need a robust, cost-effective hay round baler that can directly replace older John Deere models (such as 568, 569, 569 Premium and similar series) without major modifications to existing equipment or operations.

Built in Brazil with components proven under local conditions – from the dry Northeast to the high-humidity Center-West and South regions – this jd round baler replacement uses a 2.24 m wide pickup and produces fixed-chamber bales of 1.20 m × 1.50 m (diameter × width), matching the most common bale size used by Brazilian livestock and dairy farmers for corn silage, brachiaria, tifton, coastcross, sugar-cane tops and natural pasture hay.

Key practical advantages for Brazilian users:

• Full compatibility with John Deere net-wrap and twine systems (same roller and feeding layout)
• Heavy-duty driveline and chains rated for Brazilian high-density silage (up to 750 kg/bale wet weight)
• Reinforced pickup with 5 tine bars and hydraulic lift, ideal for uneven terrain common in Mato Grosso, Goiás, Minas Gerais and Rio Grande do Sul
• Simple mechanical design that allows maintenance with standard tools available at any rural workshop
• Lower acquisition and spare-parts cost compared to original JD units while maintaining similar daily output (80–120 bales/hour depending on conditions)

Farmers across São Paulo, Paraná, Mato Grosso do Sul and Bahia have already adopted the S9000 Classic as their main replacement of John Deere baler, especially when rebuilding or expanding fleets after the 2024/2025 harvest season.

Brazil Agricultural Balers Co., Ltd provides nationwide technical support, genuine spare parts stock in Barueri-SP and fast delivery to all Brazilian states. Contact our team for compatibility confirmation with your current John Deere tractor and baler monitor system.

Product Specification

Key Features of the 9YG-2.24D (S9000 Classic) Round Hay Baler

Designed and built in Brazil as a direct, drop-in replacement for John Deere 568/569 series round balers, the 9YG-2.24D (S9000 Classic) incorporates proven upgrades that address the real-world demands of Brazilian producers working with high-volume silage and heavy tropical forages.

• Safety-focused traction drive system Adopts a fully independent double cross-shaft traction design with reinforced H-type cardan joints. This configuration significantly increases torque capacity and eliminates the common PTO shaft failures seen in older John Deere round baler models when operating in dense, wet silage in Mato Grosso and Goiás.
• Heavy-duty pickup and feeding 2.24 m wide pickup equipped with five tine bars, hydraulic pickup lift and an extra roller baffle that prevents wrapping in sticky sugarcane tops or coastcross. The reinforced chain-driven feeding rotor and fixed chamber (1.20 m diameter × 1.50 m width) produce consistent 4x4 round baler size bales (approximately 600–750 kg wet weight) widely used across Brazil for silage and dry hay storage.
• Enhanced net-wrap reliability Uses the same net-wrap routing and tensioning system as original John Deere equipment, allowing operators to continue using existing rolls of John Deere CoverEdge or compatible Brazilian brands without adjustment.
• Warehouse-friendly large square bale box option Optional rear-mounted bale accumulator can be quickly converted to carry 3x3 round baler spare bales or tools, reducing trips across large Center-West properties.
• Simplified maintenance and parts availability All wear items (bearings, chains, pickup tines, belts) are standard sizes stocked year-round in Barueri-SP, with nationwide delivery in 48–72 hours to any state. Mechanics familiar with John Deere round balers can service the S9000 Classic using the same tools and procedures.

Brazilian farmers searching for a dependable round baler for sale near me or a proven 4x4 round baler for sale now have a locally manufactured alternative that matches John Deere performance while reducing both initial investment and long-term operating costs in real field conditions.

Working Principle of the 9YG-2.24D (S9000 Classic) Round Baler

The 9YG-2.24D (S9000 Classic) operates as a fixed-chamber round baler with a chain-and-slat design, following the same basic principle used in John Deere 568/569 series machines so that operators already familiar with JD balers can run it without retraining.

1. Crop pickup The 2.24 m wide pickup with five tine bars lifts the windrow from the ground. A hydraulic cylinder raises or lowers the pickup according to ground contour. An auger or feed roller at the rear of the pickup merges the material into the center before it enters the baling chamber.
2. Initial bale formation Material is pushed by a heavy rotor (starter roller) into the lower part of the fixed chamber. Six endless chains with steel slats run over rollers and carry the crop upward. As soon as the first layer of material touches the moving chains, it starts rolling on itself and a soft core begins to form.
3. Bale growth and density control The chamber diameter is fixed at 1.20 m. As more material is fed in, the forming bale is forced to rotate against two upper and two lower density cylinders (hydraulic rams). These cylinders maintain constant pressure on the bale surface through the tractor’s hydraulic system. Pressure can be adjusted from the cab (usually 120–180 bar) to obtain the required density for dry hay or wet silage.
4. Net wrapping or twine tying When the bale reaches full size (1.50 m width), the operator receives an audible/visual signal from the monitor (same BaleTrak system used on JD balers). The tractor is stopped, and the net-wrap cycle starts automatically or manually. Net is fed across the full bale width for 1.8–2.5 turns (operator choice). The same duckbill and cutter mechanism as John Deere is used, so existing net rolls are fully compatible.
5. Bale ejection After wrapping, the tailgate is opened hydraulically. The bale sits on a short ejection ramp and rolls clear of the machine in 4–6 seconds. The tailgate closes and the baler is ready for the next cycle.

The entire process is driven by a single PTO shaft (540 or 1000 rpm depending on tractor setup) through a reinforced double cardan driveline. All moving parts (chains, pickup, rotor) receive power through heavy-duty roller chains and gearboxes designed for Brazilian high-density crops. This straightforward mechanical layout is the reason maintenance crews in Mato Grosso, Goiás, Paraná and Minas Gerais can service the S9000 Classic with the same tools and knowledge they already use on John Deere equipment.

Crops Handled by the 9YG-2.24D (S9000 Classic) Round Baler

The 9YG-2.24D (S9000 Classic) is a versatile fixed-chamber hay round baler designed for Brazilian producers who need a single machine to handle multiple crops throughout the year. Built in Ribeirão Preto-SP, it produces consistent 1.20 m × 1.50 m bales suitable for both dry hay storage and silage pits across Mato Grosso, Goiás, Paraná, Bahia and Rio Grande do Sul.

This reliable round baler for sale effectively processes the following crops commonly grown in Brazil:

• Corn silage – High-volume maize from Center-West and South regions; forms dense, wet bales up to 750 kg
• Pasture grasses – Brachiaria, Tifton 85, Coastcross and natural pastures; ideal for dry hay or silage in livestock operations
• Sugarcane tops – Post-harvest cane leaves and tops from São Paulo and Northeast mills; prevents wrapping with reinforced pickup
• Alfalfa – Multiple cuts per season in Paraná and Minas Gerais; produces well-shaped bales for dairy feed
• Wheat straw – Dry residue after grain harvest in Rio Grande do Sul and Paraná; clean pickup with minimal leaf loss
• Rice straw – Common in irrigated areas of Rio Grande do Sul; handles light, dry material without clogging
• Reed (capim-colonião) – Tough forage from reclaimed pastures; heavy-duty round baler PTO shaft manages the load
• Cotton stalks – Post-harvest residue in Mato Grosso and Bahia; breaks down material for easier incorporation

Farmers looking for a practical round hay baler for sale appreciate that one S9000 Classic unit can cover the entire crop rotation – from safrinha corn silage in March to wheat straw in August and pasture hay in the dry season – without changing machines or settings. All components are stocked locally in Barueri-SP, keeping the baler in the field longer across Brazil’s diverse growing regions.

Customer Reviews

José Roberto da Silva Fazenda Boa Vista, Uberlândia – Minas Gerais, Brazil “We replaced two 569 John Deere balers with the S9000 Classic in 2024. The pickup width and bale size are identical, so we kept the same tractors and bale wrappers. Net wrap system works exactly the same as the original JD – no training needed for the operators. Parts arrive from Barueri in two days when we order. So far it has done 18 000 bales of brachiaria and corn silage without major issues.”

Lucas Fernández Estancia La Ponderosa, Salto – Uruguay “Bought one unit in March 2025 to replace a worn-out John Deere 568. The driveline with the double cross-shaft is definitely stronger – we run it in heavy ryegrass silage and have not broken a single PTO shaft this season (something that used to happen twice a year with the old baler). Price was about 38 % lower than a new John Deere. Service is done by the same mechanic who knows the JD balers.”

Tomás Herrera Agrícola San Carlos, Córdoba – Argentina “We use it mainly for wheat straw and alfalfa. The 2.24 m pickup covers the same windrow as our previous 569, and the bale density is very similar. The only difference we notice is that the chains and sprockets are heavier than the original JD parts. After 9 200 bales the wear is normal, nothing excessive. Spare parts cost roughly half of genuine John Deere prices here in Argentina through the Brazilian distributor.”

Guilherme Mendes Fazenda Rio Verde, Campo Grande – Mato Grosso do Sul, Brazil “Running two S9000 Classic side by side with two remaining JD 569 Premium. Daily output is the same, around 95–110 bales per machine in corn silage. The hydraulic pickup lift is handy on our rolling terrain. Biggest practical advantage: when something wears out, we get the part delivered to the farm in 48–72 hours instead of waiting weeks for JD parts from the U.S.”

Marcos Oliveira Cooperativa Agropecuária, Castro – Paraná, Brazil “We bought three units for the cooperative members in 2024/2025 season. All members were already familiar with John Deere monitors and net systems, so the transition was straightforward. The baler produces the standard 1.20 × 1.50 m bale that fits perfectly in our silage pits and hay sheds. Maintenance costs have dropped noticeably compared to the older green machines we are phasing out.”

About Brazil Agricultural Balers Co., Ltd

Brazil Agricultural Balers Co., Ltd was established in February 2021 and is headquartered in Barueri, São Paulo state, with its main manufacturing facility located in the agricultural machinery industrial park of Ribeirão Preto – SP, in the heart of Brazil’s most productive farming region.

The company operates as a fully integrated manufacturer specializing in forage harvesting equipment and driveline components, combining research, development, production, sales and after-sales service. With a registered capital of R$ 10 million, the plant covers over 32,000 m² and currently employs 180 people focused on serving Brazilian and South American producers.

Recognized as a national-level high-technology enterprise, Brazil Agricultural Balers Co., Ltd maintains a certified R&D center, ISO 9001:2015 quality management system, and holds AAA credit rating. The company owns dozens of registered patents related to round baler drivelines, pickup systems and hydraulic components, all developed using CAD/CAE systems and validated through in-house testing laboratories.

Production is concentrated on two dedicated assembly lines for round balers and hay rakes with an annual capacity of 2,000 units each. The factory is equipped with CNC laser cutting, robotic welding cells and electrostatic powder-coating lines, ensuring consistent quality for the demanding conditions found from Rio Grande do Sul to Mato Grosso and Bahia.

All products are exported under the company’s own brands and the facility holds full import/export rights.

Additional Product Lines – Driveline and Hydraulic Components for Brazilian Agriculture

In addition to the 9YG-2.24D (S9000 Classic) round baler, Brazil Agricultural Balers Co., Ltd manufactures a complete range of replacement and OEM-quality components widely used throughout São Paulo, Paraná, Goiás, Mato Grosso and Minas Gerais:

• Agricultural gearboxes for round and square balers, hay rakes, and silage wrappers (direct replacement for John Deere, New Holland, Krone and other major brands operating in Brazil)
• Heavy-duty PTO shafts with double cross-shaft (duplo cardan) design, reinforced for high-density corn silage and sugarcane tops common in Center-West and Northeast regions
• Hydraulic cylinders for pickup lift, tailgate and bale density systems, built to the same specifications as original equipment used on John Deere 568/569 series balers

These components are kept in permanent stock at the Barueri-SP distribution center with next-day dispatch to all Brazilian states, providing local farmers and contractors with genuine-quality parts at significantly lower cost than imported originals, while maintaining full compatibility with existing equipment in the field.

Edited by CX